Dry Treat - Intensifia Sealant

- Sealer for porous surfaces (natural stone, paving, masonry & terracotta)

- Price per quarter

1- Always test the product on a small area first and allow 24 hour cure time to check results.

2- Surface must be clean, dry and free of residues.

3- Generously apply INTENSIFIA using low pressure hand sprayer, clean brush or lambswool applicator. Avoid contact with surrounding areas.

4- Allow approximately 30 minutes for product to penetrate the surface then thoroughly polish off any excess product residue with clean, dry, white cloths, towels or similar. 

5- Leave product to cure for at least 60 minutes, then repeat steps 3 and 4. Total application rate is approximately one quart per 20-250 sq. ft. (2-25 sqm) depending on surface absorption. A third coat may be required for premium stain protection on very porous surfaces.

6- Avoid contact with moisture for a minimum of 8 hours after application. Full curing takes 4 weeks. 

7- Use an organic solvent for e.g. methylated spirits to clean equipment.